Setting Initial Settings On The Operator Panel - Fuji Xerox DocuPrint CM115 w User Manual

Setting Initial Settings on the Operator Panel

You need to set the printer language, clock date, and time when you turn on the printer for the first time.
When you turn the printer on, the wizard screen to perform the initial setup appears on the LCD panel. Follow the
steps below to set the initial settings.
NOTE:
• If you do not start configuring the initial settings, Ready appears on the LCD panel in three minutes. After that, you can set the
following initial setup by enabling Power On Wizard on the operator panel if needed.
For more information about the operator panel, see "Understanding the Printer Menus" on page 164.
1
Select the language you want to use on the operator panel, and then press the
2
Press the button to start setting the region.
3
Select your region, and then press the
4
Select the appropriate time zone, and then press the
5
Specify the current date, and then press the
6
Specify the current time, and then press the
7
Press the button to complete the initial settings on the operator panel.
button.
button.
button.
button.
button.
Basic Operation 25