Fuji Xerox DocuPrint CM115 w User Manual page 234

Error Code
016-985
017-970
017-988
018-338
024-340
024-360
024-371
024-958
024-963
026-720
026-721
026-722
026-723
026-750
026-751
026-752
031-521
031-526
031-529
031-530
031-533
234 Troubleshooting
What You Can Do
Attached file size is larger than you defined. Press the
following:
• Enlarge Max E-Mail Size.
• Lower the resolution setting.
• Change the file format of the scanned image.
Memory is likely to be full. Press the
• Delete the data stored in the memory.
• Lower the resolution setting.
• Reduce the number of pages.
Press the button to clear the message. Check if the interface cable is securely connected or
your computer does not have any problem.
Turn off the printer, and then on. If this does not solve the problem, contact the Fuji Xerox local
representative office or an authorized dealer.
See also:
• "Online Services" on page 263
Turn off the printer, and then on. If this does not solve the problem, contact the Fuji Xerox local
representative office or an authorized dealer.
See also:
• "Online Services" on page 263
Load the specified paper and press the
See also:
• "Loading Print Media in the Multipurpose Feeder (MPF)" on page 85
• "Loading Print Media in the Priority Sheet Inserter (PSI)" on page 91
Press the button to clear the message and load the specified paper. Follow the on-screen
instruction if one appears.
See also:
• "Loading Print Media in the Multipurpose Feeder (MPF)" on page 85
• "Loading Print Media in the Priority Sheet Inserter (PSI)" on page 91
Press the button to clear the message. Check if the USB storage device has enough memory.
Press the button to clear the message. Check if the USB storage device is write-protected or
gets any disk problem.
Press the button to clear the message. Check if the path and file name to save the data is too
long.
Press the button to clear the message. Check if the interface cable is securely connected, or
restart the application you use.
Press the button to clear the message. Check if the interface cable is securely connected.
Press the button to clear the message. Check if the access setting to the SMB server is correct
by contacting your server administrator.
Press the button to clear the message. Check if the domain name of the SMB server is correct.
Check DNS connection, or check if the name of the forwarding destination server is registered with
DNS.
Press the button to clear the message. Check if the network is properly connected and if the
password for the SMB server is correct.
Press the button to clear the message. Check if the working path setting to the SMB server is
correct.
Press the button to clear the message. Check the following:
• If the file name you specified is not used by other users.
• If file or folder that has the same name as the one you specified already exists.
• If the SMB server encounters any write-protection or disk problem.
button to clear the message. Try the
button to clear the message. Try the following:
button to clear the message.