Collated; Reduce/Enlarge - Fuji Xerox DocuPrint CM115 w User Manual

5
If necessary, customize the copy settings such as number of copies, copy size, and image quality.
See also:
• "Setting Copy Options" on page 122
6
Press the (Start) button to start copying.
 Collated
Sort the copy outputs. For example, if you make two sets of a three-page document, the first set will be printed
followed by the second set.
NOTE:
• Copying documents with a large amount of data may exhaust available memory. If a memory shortage occurs, cancel the
collating by turning Collated to Off on the operator panel.
1
Place a single document facing down on the document glass and close the document cover.
See also:
• "Making Copies From the Document Glass" on page 121
2
Press the Copy button.
3
Select Collated, and then press the
4
Select the desired setting, and then press the
NOTE:
• The value marked by an asterisk (*) is the factory default setting.
Off*
On
5
If necessary, customize the copy settings such as the number of copies, copy size, and image quality.
See also:
• "Setting Copy Options" on page 122
6
Press the (Start) button to start copying.
When Collated is set to On, the display prompts you for another page. Select Yes or No, and then press the
button.
If you select Yes, select Continue or Cancel, and then press the
 Reduce/Enlarge
Reduce or enlarge the size of a copied image, from 25% to 400%.
NOTE:
• When you make a reduced copy, black lines may appear at the bottom of your copy.
• This item is available only when N-Up is set to Off or Manual.
1
Place a single document facing down on the document glass and close the document cover.
See also:
• "Making Copies From the Document Glass" on page 121
2
Press the Copy button.
124 Copying
button.
button.
Does not sort the copy output.
Sorts the copy outputs.
button.