Setting Initial Settings On The Operator Panel - Fuji Xerox DocuPrint M205 b User Manual

Setting Initial Settings on the Operator Panel

You need to set the printer language when you turn on the printer for the first time.
When you turn on the printer, a wizard appears on the LCD panel. Follow the steps below to set the
initial settings.
NOTE:
• If you do not start configuring the initial settings, Select Function appears on the LCD panel in three
minutes. After that, you can set the following initial setup by enabling Power On Wizard on the operator
panel if needed.
For more information on the operator panel, see
1
Select the language you want to use on the operator panel, and then press the
2
Press the button to complete the initial settings on the operator panel.
"Understanding the Printer Menus" on page 148.
button.
Basic Operation 40