Setting Initial Settings On The Operator Panel - Fuji Xerox DocuPrint CM215 series User Manual

Setting Initial Settings on the Operator Panel

You need to set the printer language, clock date, and time when you turn on the printer for the first
time. (Clock date and time are available only on the DocuPrint CM215 f/CM215 fw.)
When you turn on the printer, a wizard appears on the LCD panel. Follow the step below to set the
initial settings.
NOTE:
• If you do not start configuring the initial settings, Select Function appears on the LCD panel in three
minutes. After that, you can set the following initial setup by enabling Power On Wizard on the operator
panel if needed.
For more information about the operator panel, see
• For the DocuPrint CM215 f/CM215 fw
1
Select the language you want to use on the operator panel, and then press the
2
Press the button to start setting the region.
3
Select your region, and then press the
4
Select the appropriate time zone, and then press the
5
Specify the current date, and then press the
6
Specify the current time, and then press the
7
Press the button for fax setup.
If you want to skip the fax setup, press the
8
Enter your fax number, and then press the
9
Enter a name, and then press the
10
Press the button to complete the initial settings on the operator panel.
• For the DocuPrint CM215 b
1
Select the language you want to use on the operator panel, and then press the
52 Basic Operation
"Understanding the Printer Menus" on page
button.
button.
button.
button.
(Start) button.
button.
button.
274.
button.
button.