3
Adjust the paper width guides to their maximum width.
4
Before loading the print media, flex the sheets and fan them. Straighten the edges of the stack on a level
surface.
5
Load print media on the PSI with the top edge first and with the recommended print side facing up.
6
Adjust the paper width guides until they rest lightly against the edges of the stack of print media.
7
Select the paper type from the print driver if the loaded print media is not plain paper. If a user-specified print
media is loaded in the PSI, you must specify the paper size setting by using the print driver.
NOTE:
•
For more information about setting the paper size and type on the print driver, refer to the Help provided for the print driver.
92
Printing Basics