Set A Waypoint By Projecting A Position; Set A Waypoint By Entering A Position - Lowrance GlobalMap 7200C Operation Instructions Manual

Set a Waypoint by Projecting a Position

This feature sets a waypoint at a point located a specific distance and
bearing from a reference position. The reference position may be a map
feature or can be selected from your waypoint or Points of Interest lists.
1. Press |
WPT
2. Press to
↓
P
3. Press to
→
map feature or Point of Interest. When the feature has been selected,
press Now choose the reference point by its name or select the one
ENT.
nearest your location and press
the list then press
waypoint screen.
4. Press to
↓
then press
→
rect. Press
ENT
5. Press to
↓
then press
→
rect. Press
ENT
6. Press to
↑
P
simply save the new projected waypoint by pressing
can edit the waypoint (Press
to the new waypoint.).

Set a Waypoint by Entering a Position

This feature allows you to enter a position if you know the altitude,
depth, latitude or longitude for the waypoint. To do this:
1. Press |
WPT
2. Press to
↓
E
A dialog box will appear on screen. Within the dialog box you can name
the waypoint, enter waypoint's altitude, depth, latitude and longitude.
To enter the waypoint's latitude and longitude in the dialog box.
1. to
→
L
ATITUDE
press to the next character and repeat until the latitude is correct.
→
Press .
ENT
2. to
↓
L
ONGITUDE
tude (Press
EXIT
point.).
to
→
S
UBCATEGORY
P
ROJECTED OSITION
C R
HOOSE EFERENCE
|
ENT ENT
| . Press
D ENT
ISTANCE
to the next character and repeat until the distance is cor-
.
| . Press
B ENT
EARING
to the next character and repeat until the bearing is cor-
.
| . The Edit Waypoint menu appears. You can
ENT
ROJECT
to
→
S
UBCATEGORY
P
NTERED OSITION
| . Press
ENT
. Repeat the above steps to enter the waypoint's longi-
| if you want to begin navigating to the new way-
ENT
column|
↓
| | to
→
ENT C
| . Use
ENT
Choose your reference point from
ENT.
, which will take you back to the project
or
↑ ↓
or to change the first character,
↑ ↓
| if you want to begin navigating
EXIT ENT
column|
↓
| | to
→
ENT C
REATE
or to change the first character, then
↑ ↓
72
to | .
N ENT
EW
| .
ENT
REATE
and to select a waypoint,
↑ ↓
to change the first character,
EXIT
to | .
N ENT
EW
| .
ENT
| or you
EXIT