Mounting The Unit: Bracket, In-Dash Or Portable - Lowrance GlobalMap 7200C Operation Instructions Manual

NOTE:
You do not need a Bus Adapter Cable with this unit if you use an
approved Devicenet NMEA 2000 connector. Approved Devicenet
NMEA 2000 connectors work with Lowrance red connector dis-
play units and components, so no adapter cables are needed.

Mounting the Unit: Bracket, In-Dash or Portable

You can install the GlobalMap on the top of a dash with the supplied
gimbal bracket. The GlobalMap 7200 and GlobalMap 7300 can also be
installed in the dash or mounted on a portable power supply.
If you use the supplied bracket, you may be interested in the optional R-A-
®
M bracket mounting system. This converts the unit's gimbal bracket to a
swivel mount, which can be used on the dash or overhead mounting posi-
tions. Installation instructions are supplied with the R-A-M mounting
kits. R-A-M offers permanent mounts and temporary mounts suitable for
many vehicle types. See your Eagle dealer or visit the LEI web site
(
www.lei-extras.com
is on the inside back cover of this manual. For a complete look at the
many mounting options, visit the RAM web site at
Bracket Installation
Mount the GlobalMap in any convenient location, provided there is clear-
ance behind the unit when it's tilted for the best viewing angle. You should
also make sure there is enough room behind the GlobalMap to attach the
power and GPS antenna/receiver module cables (Drawings beginning on
the next page shows the dimensions of the gimbal-mounted GlobalMaps.).
Holes in the bracket's base allow wood screw or through-bolt mounting.
You may need to place a piece of plywood on the backside of thin fiber-
glass panels to reinforce the panel and secure the mounting hardware.
) for the latest options; accessory ordering information
Optional R-A-M mounting system.
22
www.ram-mount.com
.