Ep-15 Fluid Level Configuration - Lowrance GlobalMap 7200C Operation Instructions Manual

EP-15 Fluid Level Configuration

To input Device Name:
1. Press
MENU| MENU
NMEA 2000 menu will appear with five options: Bus Setup, Fuel Man-
agement, NMEA 2000 Alarms, Waypoint Sharing and Backlight Syn-
chronization.
2. Highlight
B
ration menu. A list of network devices will be at the top of the page.
3. Select a fluid level you want to rename and press
figuration menu will appear with the Device Name dialog box highlighted.
and use ↑ ↓, ← → to input the desired name for the fluid
4. Press
ENT
level. Press
ENTER
To select Tank Instance (Location):
1. Press
MENU| MENU
NMEA 2000 menu will appear with five options: Bus Setup, Fuel Man-
agement, NMEA 2000 Alarms, Waypoint Sharing and Backlight Syn-
chronization.
2. Highlight
B
ration menu. A list of network devices will be at the top of the page.
3. Select the desired fluid level and press
tion menu will appear.
4. Highlight
T
stance menu with the following options: Tank 1, Tank 2, Tank 3 and
Unknown.
5. Select the desired Tank Instance (location) and press
lowing confirmation message will appear: Are you sure you wish to
change this device's configuration?
6. Highlight
Y
main display.
To select Fluid Type:
1. Press
MENU| MENU
2000 menu will appear with five options: Bus Setup, Fuel Management,
NMEA 2000 Alarms, Waypoint Sharing and Backlight Synchronization.
2. Highlight
B
ration menu. A list of network devices will be at the top of the page.
3. Select the desired fluid level and press
Configuration menu will appear.
4. Press ↓ to
menu with the following options: Fuel, Water, Gray Water, Live Well,
Oil, Black Water and Unknown.
, use ↑ ↓ to select
and press
S
US ETUP
. Press
EXIT
, use ↑ ↓ to select
and press
S
US ETUP
and press
I
ANK NSTANCE
and press
ENT
ES
, use ↑ ↓ to select
and press
S
US ETUP
and press
F T
LUID YPE
NMEA 2000
, which will open the Bus Configu-
ENT
repeatedly to get back to the main display.
NMEA 2000
, which will open the Bus Configu-
ENT
, which will open the Tank In-
ENT
. Press
EXIT
NMEA 2000
, which will open the Bus Configu-
ENT
ENT
, which will open the Fluid Type
ENT
134
and press
. The Device Con-
ENT
and press
. The Device Configura-
ENT
repeatedly to get back to the
and press
ENT
. The Fluid Level Device
. The
ENT
. The
ENT
. The fol-
ENT
. The NMEA