Nmea 2000 Alarms - Lowrance GlobalMap 7200C Operation Instructions Manual

4. Highlight
R
tion message will appear: Are you sure you wish to Reset Calibration?
Select and press
Y
ES
been returned to factory defaults.
To Reset Trip:
The Reset Trip function allows you to reset to zero the running total of
fuel used on a particular trip.
1. Press
MENU
2. Highlight
menu will appear.
3. Select
R
ESET
will appear: Are you sure you wish to Reset Trip? Highlight
press . The Trip Fuel Used figure has been reset to zero.
ENT
To Reset Seasonal:
Your unit can track fuel usage not only for trips, but also for entire sea-
sons. The reset seasonal command allows you to reset to zero the run-
ning total of fuel used during a season.
1. Press
MENU
2. Highlight
F
UEL
will appear.
3. Select
R
ESET
sage will appear: Are you sure you wish to Reset Seasonal?
Highlight and press
Y
ES

NMEA 2000 Alarms

The NMEA 2000 Alarms menu allows you to set Full and Empty fuel
alarms for the EP-10 Fuel Flow, EP-15 Fluid Level, EP-50 Storage De-
vice and the Suzuki Engine Interface. The alarms may be set to a per-
centage (0-100%) of tank capacity.
The second tab at the top of the NMEA 2000 Alarms page is the Alarm
Status Tab. When an alarm has been set for a device, the alarm and its
current status will be shown on the Alarm Status window. To view the
Alarm Status window, highlight the Alarm Status tab and press
To set NMEA 2000 Alarm:
1. Press
MENU
2. Highlight
NMEA 2000 A
3. Highlight
F
you want to set an alarm for and press
4. Highlight the
Empty Alarm) and press
C
ESET ALIBRATION
. Calibration settings for the selected fuel have
ENT
| , select
MENU
F M
UEL ANAGEMENT
and press
T
RIP
| , select
MENU
M
ANAGEMENT
and press
S
EASONAL
. The Seasonal Fuel Used figure is reset to zero.
ENT
| , select
MENU
LARMS
L D
LUID EVEL EVICE
box next to the desired alarm (Full Alarm or
E
NABLED
ENT
and press
ENT
and press
NMEA 2000
and press
. The following confirmation message
ENT
and press
NMEA 2000
and press
ENT
. The following confirmation mes-
ENT
and press
NMEA 2000
and press
ENT
and press
ENT
.
ENT
to turn on the alarm.
129
. The following confirma-
.
ENT
. The Fuel Management
ENT
.
ENT
. The Fuel Management menu
.
ENT
.
. Use ↑ ↓ to select the device
and
Y
ES
.
ENT