Set A Waypoint By Projecting A Position - Lowrance GlobalMap 5200C GPS Operation Instructions Manual

This boosts waypoint position accuracy by helping to eliminate errors
caused by atmospheric conditions and other factors.
1. Press |→ to
WPT
2. Press ↓ or ↑ to
3. Wait while the unit takes points to average for the position. The
greater the number of points, the greater the accuracy. When the de-
sired number of points accumulates, press
waypoint.
4. The Edit Waypoint menu appears. You can save the waypoint by
pressing |
EXIT EXIT

Set a Waypoint by Projecting a Position

This feature sets a waypoint at a point located a specific distance and
bearing from a reference position. The reference position can be se-
lected from your waypoint list, a map feature or from the Points of In-
terest list.
1. Press |→ to
WPT
2. Press ↓ to
P
ROJECTED
3. Press → to
C
map feature or Point of Interest. When the point has been selected,
press and the point's position appears as the reference position.
ENT
4. Press ↓ to
D
then press → to the next character and repeat until the distance is cor-
rect. Press
ENT
5. Press ↓ to
B
then press → to the next character and repeat until the bearing is cor-
rect. Press
ENT
6. Press ↑ to
P
can save the new projected waypoint by pressing
edit the waypoint. Press
navigating to the new waypoint.
www.Busse-Yachtshop.de
S
UBCATEGORY
A P
VERAGE OSITION
or you can edit the waypoint.
S
UBCATEGORY
P
OSITION
R
HOOSE EFERENCE
. Press ↑ or ↓ to change the first character,
|
ENT
ISTANCE
.
| . Press ↑ or ↓ to change the first character,
ENT
EARING
.
| . The Edit Waypoint menu appears. You
ENT
ROJECTION
EXIT
column|↓ to
N
| |press → to
ENT
ENT
column|↓ to
N
| |→ to
ENT C
REATE
. Use ↑ and ↓ to select a waypoint,
|
ENT
| if you want to immediately begin
ENT
70
email: info@busse-yachtshop.de
| .
ENT
EW
|
C ENT
REATE
to create and save the
| .
ENT
EW
| .
ENT
| or you can
EXIT EXIT
.