Lowrance GlobalMap 7200C Operation Instructions Manual page 129

Waypoint Information screens with the Go To Waypoint command se-
lected (left) and the Find on Map command selected (right).
To clear these menus and return to the previous page, press
peatedly.
5.
If you're looking by name
name in the top selection box. Press
press to move the cursor to the next letter and repeat until the name is
→
correct, then press
tion list by pressing
list and press
Find By Name menu (left). Waypoint Information screen (center). The
found waypoint (right) is highlighted by the cursor on the Map Page.
A. T
o navigate
mand is already highlighted.). The unit will show navigation in-
formation to the waypoint.
B. T
o find
appears with the cursor centered on the found waypoint.
To clear these menus and return to the previous page, press
peatedly.
, there are two options:
|
ENT ENT
, then press
ENT
. The waypoint information screen appears.
ENT
to the waypoint, press
the waypoint, press
or
↑ ↓
. Or you can jump down to the lower selec-
B.
or
↓ ↑
to
↓
F
IND ON
121
You can
A.
to change the first letter, then
to select a waypoint from the
(Go To Waypoint com-
ENT
| . The Map Page
M ENT
AP
re-
EXIT
the
spell out
re-
EXIT