Lowrance GlobalMap 7200C Operation Instructions Manual page 65

The Transfer My Data submenu asks if you want to save data to the
MMC or load data from the MMC into the unit's memory.
2. The Transfer My Data menu includes a message that tells you if a
MMC is present or not. If no MMC is present, you must insert a card to
activate the Load or Save commands.
To transfer data from the GlobalMap to the MMC press
To transfer data from the MMC to the GlobalMap press
3. Saving to MMC: To accept the default name "Data" for the GPS
Data File, press
shown in the following figures), press
lection box. Press
the next character and repeat until the name is correct. Then, press
| to
↓
ENT S
AVE
The unit will display a completion message when the data transfer is
finished. To return to the Page view, repeatedly press
These figures (left to right) show the menu sequence for naming and
saving a GPS Data File from the GlobalMap's memory to an MMC.
to
↓
S D
AVE
or to change the first character, then press
↑ ↓
| .
D ENT
ATA
| . If you wish to rename the file (as
ENT
ATA
ENT
57
→
to activate the file name se-
EXIT
(for ).
ENT S
AVE
to | .
L ENT
OAD
to
→
.