Adding Fuel To Tank; Engine Operations - Lowrance GlobalMap 7200C Operation Instructions Manual

Adding Fuel to Tank

Tank Location, Fuel Added and Add Fuel commands work together to
keep NMEA 2000 fuel data consistent with the actual amount of fuel
added to the fuel tank(s).
1. Press
MENU
2. The NMEA 2000 menu will appear with five options: Bus Setup,
Fuel Management, NMEA 2000 Alarms, Waypoint Sharing and Back-
light Synchronization. Select
3. Highlight
T
appear with up to three options: Port, Center and Starboard.
4. Select the tank you added fuel to and press
5. Follow the steps below that apply to your tank.
If you filled up the tank:
A. Press the
F
appear: Are you sure you wish to Fill Tank? Press
sage will appear: Do you wish to re-calibrate the device? Highlight
and press
ENT
If you did not fill up the tank:
B. Highlight
F
Use ↑ ↓ , ← → to input the amount of fuel added to the tank and press
. Select the
ENT
appear: Are you sure you wish to Add Fuel? Highlight
6. Press repeatedly to get back to the main display.
EXIT

Engine Operations

The lower half of the Fuel Management menu contains the following
Engine Operation functions: Engine Select, Reset Calibration, Reset
Trip and Reset Seasonal.
Engine Select
Engine Select allows you to choose the desired engine when resetting
calibration, resetting trip fuel and resetting seasonal fuel.
To Reset Calibration:
Choosing the Reset Calibration command will switch fuel flow calibra-
tion settings back to factory defaults.
1. Press
MENU
2. Highlight
F
UEL
will appear.
3. Highlight to
the engine attached to the desired fuel flow — and press
| , select
MENU
and press
L
ANK OCATION
button and press
T
ILL ANK
.
and press
A
UEL DDED
button and press
A F
DD UEL
| , select
MENU
M
ANAGEMENT
E S
NGINE ELECT
and press
NMEA 2000
F M
UEL ANAGEMENT
. The Tank Location menu will
ENT
ENT
to access the
ENT
ENT
and press
NMEA 2000
and press
ENT
and press
ENT
128
.
ENT
and press
.
ENT
. The following message will
ENT
F A
UEL
. The following message will
and press
Y
ES
.
ENT
. The Fuel Management menu
. Select the desired engine —
.
ENT
. Another mes-
N
dialog box.
DDED
.
ENT
.
ENT
O