Suzuki Engine Interface Configuration - Lowrance GlobalMap 7200C Operation Instructions Manual

To restore default settings:
1. Press
MENU| MENU
NMEA 2000 menu will appear with five options: Bus Setup, Fuel Man-
agement, NMEA 2000 Alarms, Waypoint Sharing and Backlight Syn-
chronization.
2. Highlight
B
ration menu. A list of network devices will be at the top of the page.
3. Select the desired fluid level and press
tion menu will appear.
4. Highlight
A
5. Select
R
ESTORE
appear: Are you sure you wish to change this device's configuration?
6. Highlight
Y
main display.
NOTE:
The Fluid Level Device Configuration menu also contains the Cali-
brate button, but we will address that later in the segment covering
Calibration.

Suzuki Engine Interface Configuration

To input Device Name:
1. Press
MENU| MENU
NMEA 2000 menu will appear with five options: Bus Setup, Fuel Man-
agement, NMEA 2000 Alarms, Waypoint Sharing and Backlight Syn-
chronization.
2. Highlight
B
ration menu. A list of network devices will be at the top of the page.
3. Use ↑ ↓ to select the engine interface you want to rename and press
. The Device Configuration menu will appear with the Device Name
ENT
dialog box highlighted.
and use ↑ ↓, ← → to input a name for the interface. Press
4. Press
ENT
. Press
ENT EXIT
To select a Location:
1. Press
MENU| MENU
NMEA 2000 menu will appear with five options: Bus Setup, Fuel Man-
agement, NMEA 2000 Alarms, Waypoint Sharing and Backlight Syn-
chronization.
2. Highlight
B
ration menu. A list of network devices will be at the top of the page.
3. Select the desired engine interface and press
figuration menu will appear.
, use ↑ ↓ to select
and press
S
US ETUP
O
DVANCED PTIONS
and press
D
EFAULTS
and press
ENT
ES
, use ↑ ↓ to select
and press
S
US ETUP
repeatedly to return to the main display.
, use ↑ ↓ to select
and press
S
US ETUP
NMEA 2000
, which will open the Bus Configu-
ENT
and press
ENT
. The following message will
ENT
. Press
EXIT
NMEA 2000
, which will open the Bus Configu-
ENT
NMEA 2000
, which will open the Bus Configu-
ENT
136
and press
. The Device Configura-
ENT
.
repeatedly to get back to the
and press
and press
. The Device Con-
ENT
. The
ENT
. The
ENT
. The
ENT