To Remove Overlaid Data - Lowrance GlobalMap 7200C Operation Instructions Manual

From Overlay Data Shown menu (left) press ENT to see Data Viewer
(center). Select a category and press ENT. Bearing, Closing Speed and
Off Course have been selected from the Navigation category.

To remove overlaid data:

1. While on the Page that shows the item or items you want to remove,
press |↓ to | .
MENU O D ENT
VERLAY ATA
2. You'll see a list of the overlay data currently displayed. Select the item
you want to remove from your display and press | to remove the
ENT ENT
data. To remove another item, select the item and press | .
ENT ENT
3. When you have finished removing all the items you want from the
screen, press to return to the page display.
EXIT
Overlay Data Shown menu with Off Course option selected (left). Press
ENT to access Remove option (right). Press ENT again to remove item.
To move overlaid data:
You may find it useful to rearrange data that is floating in your display
window.
1. From one of the Map Pages, press |↓ to | .
MENU O D ENT
VERLAY ATA
2. You'll see a list of the overlay data currently displayed. Select the
item you want to move and press |→ to | .
ENT M ENT
OVE
95