Replacing The Felt Wiper - Roland Texart RT-640 User Manual

Replacing the Felt Wiper

The felt wiper is a part used for cleaning the print heads. When the screen shown below is displayed on the
display screen, it is time for replacement. Replace it with a new item.
For information about purchasing felt wipers, contact your authorized Roland DG Corp. dealer.
CAUTION
Required items
Felt Wiper
1.
Enter the felt wiper replacement menu.


Remove any media.

Press .



Be sure to perform operations as specified by the instructions above,
and never touch any area not specified in the instructions.
Failure to observe these precautions may cause the machine to move sud-
denly, resulting in injury.
Tweezers
When the screen on the left is displayed, press
Press
at left.
Press
Press
Press
Press
The print-head carriage moves to a location where felt wiper replace-
ment is possible, and then the screen shown on the left appears.
Replacing Consumable Parts
several times to display the screen shown
, and then press
.
.
.
3
.
twice.
79