Maximum Printing Area When Using Crop Marks; The Media-Cutoff Location During Continuous Printing - Roland Texart RT-640 User Manual

Maximum Printing Area When Using Crop Marks

The maximum printing area when crop marks are used is reduced from the maximum printing area when crop
marks are not used by an amount equal to the crop marks.
12.5 mm
10 mm
Printing area
10 mm
12.5 mm

The Media-cutoff Location During Continuous Printing

When a media-cutoff command is sent from the computer, the cutoff location on the media is as shown in
the figure below.
Location where separated
Maximum
Crop mark
printing area
Second page
75 mm
Margin (Software RIP
setting value)
First page
Printing Area
12.5 mm
10 mm
10 mm
12.5 mm
7
129