Pausing Or Canceling Printing; Cutting Off The Media - Roland Texart RT-640 User Manual

Pausing or Canceling Printing

You can pause and cancel printing before it finishes. We do not recommend resuming printing because hori-
zontal bands are produced at the place where printing was paused.
Procedure

Press during printing.
Printing operation is paused.
Press again to resume printing.
To cancel printing, go the next procedure without pressing


Stop sending printing data from the computer

Cutting Off the Media

Procedure

Remove the left and right media clamps.

Close the front cover.

Make sure

Press .
When the screen on the left is displayed, hold down
for at least 1 second.
Printing operation is canceled.
stays steadily lit.
Printing
at this stage.
2
49