Profile > Group View Screen - ZyXEL Communications ZyWall 110 User Manual

30.2.3 Profile > Group View Screen
Select Configuration > UTM Profile > IDP > Profile and then click Add to create a new profile
or select an existing profile, then click a group in the base profile box (or double-click the existing
profile) to modify it. Group view is displayed first by default.
Figure 332 Configuration > UTM Profile > IDP > Profile > Add > Edit: Group View
The following table describes the fields in this screen.
Table 202 Configuration > UTM Profile> IDP > Profile > Add > Group View
LABEL
Name
Description
Chapter 30 IDP
DESCRIPTION
This is the name of the profile. You may use 1-31 alphanumeric characters,
underscores( ), or dashes (-), but the first character cannot be a number. This value is
_
case-sensitive. These are valid, unique profile names:
• MyProfile
• mYProfile
• Mymy12_3-4
These are invalid profile names:
• 1mYProfile
• My Profile
• MyProfile?
• Whatalongprofilename123456789012
Enter additional information about this IDP rule. You can enter up to 60 characters ("0-9",
"a-z", "A-Z", "-" and "_").
ZyWALL/USG Series User's Guide
488