Ipsec Vpn Background Information - ZyXEL Communications ZyWall 110 User Manual

Table 168 Configuration > VPN > IPSec VPN > Configuration Provisioning (continued)
LABEL
Edit
Remove
Activate
Inactivate
Move
Status
Priority
VPN Connection
Allowed User
Apply
Reset

22.6 IPSec VPN Background Information

Here is some more detailed IPSec VPN background information.
IKE SA Overview
The IKE SA provides a secure connection between the ZyWALL/USG and remote IPSec router.
It takes several steps to establish an IKE SA. The negotiation mode determines how many. There
are two negotiation modes--main mode and aggressive mode. Main mode provides better security,
while aggressive mode is faster.
Note: Both routers must use the same negotiation mode.
These modes are discussed in more detail in
various examples in the rest of this section.
The ZyWALL/USG supports IKEv1 and IKEv2. See
Chapter 22 IPSec VPN
DESCRIPTION
Select an existing entry and click Edit to change its settings.
To remove an entry, select it and click Remove. The ZyWALL/USG confirms you want to
remove it before doing so.
To turn on an entry, select it and click Activate. Make sure that Enable Configuration
Provisioning is also selected.
To turn off an entry, select it and click Inactivate.
Use Move to reorder a selected entry. Select an entry, click Move, type the number where
the entry should be moved, press <ENTER>, then click Apply.
This icon shows if the entry is active (yellow) or not (gray). VPN rule settings can only be
retrieved when the entry is activated (and Enable Configuration Provisioning is also
selected).
Priority shows the order of the entry in the list. Entry order is important as the ZyWALL/USG
searches entries in the order listed here to find a match. After a match is found the ZyWALL/
USG stops searching.
This field shows all configured VPN rules that match the rule criteria for the
IPSec
VPN client. Select a rule to bind to the associated user or group.
Select which user or group of users is allowed to retrieve the associated VPN rule settings
ZyWALL/USG IPSec
using the
entries are configured for different groups, the ZyWALL/USG will allow VPN rule setting
retrieval based on the first match found.
Users of type admin or limited-admin are not allowed.
Click Apply to save your changes back to the ZyWALL/USG.
Click Reset to return the screen to its last-saved settings.
ZyWALL/USG Series User's Guide
VPN client. A user may belong to a number of groups. If
Negotiation Mode on page
Section 22.1 on page 376
401
ZyWALL/USG
405. Main mode is used in
for more information.