Log Category Settings Screen - ZyXEL Communications ZyWall 110 User Manual

Table 326 Configuration > Log & Report > Log Setting > Edit (Remote Server) (continued)
LABEL
#
Log
Category
Selection
OK
Cancel

37.3.5 Log Category Settings Screen

The Log Category Settings screen allows you to view and to edit what information is included in
the system log, USB storage, e-mail profiles, and remote servers at the same time. It does not let
you change other log settings (for example, where and how often log information is e-mailed or
remote server names). To access this screen, go to the Log Settings Summary screen (see
Section 37.3.1 on page
Chapter 37 Log and Report
DESCRIPTION
This field is a sequential value, and it is not associated with a specific address.
This field displays each category of messages. It is the same value used in the Display and
Category fields in the View Log tab. The Default category includes debugging messages
generated by open source software.
Select what information you want to log from each Log Category (except All Logs; see
below). Choices are:
disable all logs (red X) - do not log any information from this category
enable normal logs (green check mark) - log regular information and alerts from this
category
enable normal logs and debug logs (yellow check mark) - log regular information, alerts,
and debugging information from this category
Click this to save your changes and return to the previous screen.
Click this to return to the previous screen without saving your changes.
711), and click the Log Category Settings button.
ZyWALL/USG Series User's Guide
722