Ap Management Screen - ZyXEL Communications ZyWall 110 User Manual

Each field is described in the following table.
Table 73 Configuration > Wireless > Controller
LABEL
Registration
Type
Apply
Reset

8.3 AP Management Screen

Use this screen to manage all of the APs connected to the ZyWALL/USG. Click Configuration >
Wireless > AP Management to access this screen.
Figure 135 Configuration > Wireless > AP Management
Each field is described in the following table.
Table 74 Configuration > Wireless > AP Management
LABEL
Edit
Remove
Reboot
#
IP Address
MAC Address
Model
Chapter 8 Wireless
DESCRIPTION
Select Manual to add each AP to the ZyWALL/USG for management, or Always Accept to
automatically add APs to the ZyWALL/USG for management.
If you select Manual, then go to Monitor > Wireless > AP Information > AP List, select
an AP to be managed and then click Add to Mgnt AP List. That AP will then appear in
Configuration > Wireless > Controller > Mgnt. AP List.
Note: Select the Manual option for managing a specific set of APs. This is recommended as the
registration mechanism cannot automatically differentiate between friendly and rogue
APs.
APs must be connected to the ZyWALL/USG by a wired connection or network.
Click Apply to save your changes back to the ZyWALL/USG.
Click Reset to return the screen to its last-saved settings.
DESCRIPTION
Select an AP and click this button to edit its properties.
Select an AP and click this button to remove it from the list.
Note: If in the Configuration > Wireless > Controller screen you set the Registration
Type to Always Accept, then as soon as you remove an AP from this list it
reconnects.
Select an AP and click this button to force it to restart.
This field is a sequential value, and it is not associated with any entry.
This field displays the IP address of the AP.
This field displays the MAC address of the AP.
This field displays the AP's hardware model information. It displays N/A (not
applicable) only when the AP disconnects from the ZyWALL/USG and the information is
unavailable as a result.
ZyWALL/USG Series User's Guide
163