ZyXEL Communications ZyWall 110 User Manual page 587

Table 247 Configuration > Object > AP Profile > SSID > Add/Edit SSID Profile (continued)
LABEL
VLAN Support
OK
Cancel
35.3.2.3 Security List
This screen allows you to manage wireless security configurations that can be used by your SSIDs.
Wireless security is implemented strictly between the AP broadcasting the SSID and the stations
that are connected to it.
To access this screen click Configuration > Object > AP Profile > SSID > Security List.
Note: You can have a maximum of 32 security profiles on the ZyWALL/USG.
Figure 390 Configuration > Object > AP Profile > SSID > Security List
The following table describes the labels in this screen.
Table 248 Configuration > Object > AP Profile > SSID > Security List
LABEL
Add
Edit
Remove
Object Reference Click this to view which other objects are linked to the selected security profile (for
#
Profile Name
Security Mode
Chapter 35 Object
DESCRIPTION
Select On to have the ZyWALL/USG assign the VLAN ID listed in the top part of the screen
to the built-in AP.
Select Off to have the ZyWALL/USG ignore the VLAN ID listed in the top part of the screen.
Select an Outgoing Interface to have the ZyWALL/USG assign an IP address in the same
subnet as the selected interface to the built-in AP.
Click OK to save your changes back to the ZyWALL/USG.
Click Cancel to exit this screen without saving your changes.
DESCRIPTION
Click this to add a new security profile.
Click this to edit the selected security profile.
Click this to remove the selected security profile.
example, SSID profile).
This field is a sequential value, and it is not associated with a specific profile.
This field indicates the name assigned to the security profile.
This field indicates this profile's security mode (if any).
ZyWALL/USG Series User's Guide
587