The Upnp Port Status Screen - ZyXEL Communications ZyWall 110 User Manual

Security firewalls
Hide thumbs Also See for ZyWall 110:
Table of Contents

Advertisement

Table 47 Monitor > System Status > More Information (continued)
LABEL
Signal Strength
Signal Quality
Device Manufacturer
Device Model
Device Firmware
Device IMEI/ESN
SIM Card IMSI

6.11 The UPnP Port Status Screen

Use this screen to look at the NAT port mapping rules that UPnP creates on the ZyWALL/USG. To
access this screen, click Monitor > System Status > UPnP Port Status.
Figure 104 Monitor > System Status > UPnP Port Status
The following table describes the labels in this screen.
Table 48 Monitor > System Status > UPnP Port Status
LABEL
Remove
#
Remote Host
Chapter 6 Monitor
DESCRIPTION
This is the Signal Quality measured in dBm.
This displays the strength of the signal. The signal strength mainly depends on the
antenna output power and the distance between your ZyWALL/USG and the service
provider's base station.
This shows the name of the company that produced the mobile broadband device.
This field displays the model name of the cellular card.
This shows the software version of the mobile broadband device.
IMEI (International Mobile Equipment Identity) is a 15-digit code in decimal format
that identifies the mobile broadband device.
ESN (Electronic Serial Number) is an 8-digit code in hexadecimal format that
identifies the mobile broadband device.
IMSI (International Mobile Subscriber Identity) is a 15-digit code that identifies the
SIM card.
DESCRIPTION
Select an entry and click this button to remove it from the list.
This is the index number of the UPnP-created NAT mapping rule entry.
This field displays the source IP address (on the WAN) of inbound IP packets. Since this is
often a wildcard, the field may be blank.
When the field is blank, the ZyWALL/USG forwards all traffic sent to the External Port
on the WAN interface to the Internal Client on the Internal Port.
When this field displays an external IP address, the NAT rule has the ZyWALL/USG
forward inbound packets to the Internal Client from that IP address only.
ZyWALL/USG Series User's Guide
125

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents