Chapter 41 Shutdown; Overview; What You Need To Know; The Shutdown Screen - ZyXEL Communications ZyWall 110 User Manual

41.1 Overview

Use this to shutdown the device in preparation for disconnecting the power.
Always use the Maintenance > Shutdown > Shutdown screen or the
"shutdown" command before you turn off the ZyWALL/USG or remove
the power. Not doing so can cause the firmware to become corrupt.

41.1.1 What You Need To Know

Shutdown writes all cached data to the local storage and stops the system processes.

41.2 The Shutdown Screen

To access this screen, click Maintenance > Shutdown.
Figure 539 Maintenance > Shutdown
Click the Shutdown button to shut down the ZyWALL/USG. Wait for the device to shut down before
you manually turn off or remove the power. It does not turn off the power.
You can also use the CLI command shutdown to shutdown the ZyWALL/USG.
C
HAPTER
ZyWALL/USG Series User's Guide
756
4 1
Shutdown