ZyXEL Communications ZyWall 110 User Manual page 615

Table 269 Configuration > Object > Schedule (continued)
LABEL
Start Time
Stop Time
Reference
35.8.2.1 The One-Time Schedule Add/Edit Screen
The One-Time Schedule Add/Edit screen allows you to define a one-time schedule or edit an
existing one. To access this screen, go to the Schedule screen (see
and click either the Add icon or an Edit icon in the One Time section.
Figure 414 Configuration > Object > Schedule > Edit (One Time)
The following table describes the labels in this screen.
Table 270 Configuration > Object > Schedule > Edit (One Time)
LABEL
Configuration
Name
Date Time
StartDate
StartTime
StopDate
StopTime
Chapter 35 Object
DESCRIPTION
This field displays the time at which the schedule begins.
This field displays the time at which the schedule ends.
This displays the number of times an object reference is used in a profile.
DESCRIPTION
Type the name used to refer to the one-time schedule. You may use 1-31 alphanumeric
characters, underscores( ), or dashes (-), but the first character cannot be a number.
_
This value is case-sensitive.
Specify the year, month, and day when the schedule begins.
• Year - 1900 - 2999
• Month - 1 - 12
• Day - 1 - 31 (it is not possible to specify illegal dates, such as February 31.)
Specify the hour and minute when the schedule begins.
• Hour - 0 - 23
• Minute - 0 - 59
Specify the year, month, and day when the schedule ends.
• Year - 1900 - 2999
• Month - 1 - 12
• Day - 1 - 31 (it is not possible to specify illegal dates, such as February 31.)
Specify the hour and minute when the schedule ends.
• Hour - 0 - 23
• Minute - 0 - 59
ZyWALL/USG Series User's Guide
615
Section 35.8.2 on page 614),