The Ipsec Monitor Screen - ZyXEL Communications ZyWall 110 User Manual

Security firewalls
Hide thumbs Also See for ZyWall 110:
Table of Contents

Advertisement

Table 57 Monitor > Wireless > Detected Device (continued)
LABEL
MAC Address
SSID Name
Channel ID
802.11 Mode
Security
Description
Last Seen
Refresh

6.15 The IPSec Monitor Screen

You can use the IPSec Monitor screen to display and to manage active IPSec To access this
screen, click Monitor > VPN Monitor > IPSec. The following screen appears. SAs. Click a
column's heading cell to sort the table entries by that column's criteria. Click the heading cell again
to reverse the sort order.
Figure 113 Monitor > VPN Monitor > IPSec
Each field is described in the following table.
Table 58 Monitor > VPN Monitor > IPSec
LABEL
Name
Policy
Search
Disconnect
#
Name
Chapter 6 Monitor
DESCRIPTION
This indicates the detected device's MAC address.
This indicates the detected device's SSID.
This indicates the detected device's channel ID.
This indicates the 802.11 mode (a/b/g/n) transmitted by the detected device.
This indicates the encryption method (if any) used by the detected device.
This displays the detected device's description. For more on managing friendly and rogue
APs, see the Configuration > Wireless > MON Mode screen.
This indicates the last time the device was detected by the ZyWALL/USG.
Click this to refresh the items displayed on this page.
DESCRIPTION
Type the name of a IPSec SA here and click Search to find it (if it is associated).
You can use a keyword or regular expression. Use up to 30 alphanumeric and
_+-.()!$*^:?|{}[]<>/ characters. See
details.
Type the IP address(es) or names of the local and remote policies for an IPSec SA
and click Search to find it. You can use a keyword or regular expression. Use up
to 30 alphanumeric and _+-.()!$*^:?|{}[]<>/ characters. See
on page 137
for more details.
Click this button to search for an IPSec SA that matches the information you
specified above.
Select an IPSec SA and click this button to disconnect it.
This field is a sequential value, and it is not associated with a specific SA.
This field displays the name of the IPSec SA.
ZyWALL/USG Series User's Guide
Section 6.15.1 on page 137
136
for more
Section 6.15.1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents