Trunk Installation - Victory 2009 VISION Rider's Manual

visionownersmanual.book Page 192 Wednesday, February 13, 2008 4:31 PM
MAINTENANCE
Trunk Removal (Cont.)
4. Open the trunk and remove all contents.
5. Remove the compartment cover by squeezing
between the notches (1) and lift the cover away.
6. Remove three of the four trunk mount bolts (2) using
a 13 mm socket and an extension on a suitable drive
handle.
7. Support the trunk and remove the last bolt.
8. Install the trim panel as outlined on page 194

Trunk Installation

1. Remove street trim panel (page 193) then reverse
steps above.
2. Torque trunk mounting bolts to 26 lb-ft. (35 Nm) and
license plate bracket screws to 36 lb-in. (4 Nm).
192
.
1
2