Victory 2009 VISION Rider's Manual page 79

visionownersmanual.book Page 76 Wednesday, February 13, 2008 4:31 PM
INSTRUMENTS, FEATURES, & CONTROLS
Manual Windshield Adjustment
If your motorcycle is not equipped with a motorized
windshield, you can adjust it manually using the following
procedure:
1. Stop the motorcycle and turn the key OFF.
2. Remove the windshield trim panel (see page 184).
3. Remove the retaining clip (1).
4. Hold slight downward pressure on the bottom of the
windshield (it is under slight upward spring pressure).
5. Remove the clevis pin (2), slide the windshield inner
bracket to align with one of the optional holes in the
outer bracket, then reinstall the clevis pin.
6. Install the retaining clip in the clevis pin.
7. Install the windshield trim panel (page 184).
76
1
2