Storage - Victory 2009 VISION Rider's Manual

visionownersmanual.book Page 224 Wednesday, February 13, 2008 4:31 PM

STORAGE

Removal From Storage
1. Remove the cover and unlock the front forks (if locked).
2. Check the tire pressure (page 176) and inflate the tires if necessary.
3. Install the battery (page 183) and perform an electrical check (page 86).
4. Wash and polish the motorcycle. See page 207.
5. Check the oil level. Look at the storage area for signs of fluid leaks, and check the
cause if a leak is found.
6. During storage, temperature and humidity changes can cause condensation to form in
the crankcase and mix with engine oil. Running the engine with oil that contains
condensation can cause engine damage. If your motorcycle was stored in an area
subject to wide swings in temperature and humidity (such as outdoors), it is
recommended that you change engine oil prior to running the engine.
7. Install new spark plugs if necessary.
8. Wax, polish, or apply protectant to appropriate components. See page 207.
9. Perform the pre-ride checks beginning on page 85.
10. Road test the motorcycle before returning it to regular use (page 200).
224