Trunk Installation - Victory 2012 Ness Signature Series Rider's Manual

Trunk Removal
1. Remove the seat. See page 83.
2. Disconnect the trunk wire harness.
3. Remove the license plate.
4. Remove the two 4 mm Allen screws from bot-
tom of the license plate bracket. Remove the
bracket.
5. Open the trunk and remove all contents.
6. Remove the compartment cover by squeezing
between the two notches.
7. Remove three of the four trunk mount bolts. Sup-
port the trunk before removing the last bolt.
Tool: 13 mm socket, extension, drive handle
8. Install the street trim panel. See page 84.

Trunk Installation

1. Remove the street trim panel. See page 84.
2. Reverse the trunk removal instructions to rein-
stall the trunk.
3. Tighten the trunk mounting bolts.
Torque: 26 ft-lbs (35 Nm)
4. Tighten the license plate bracket screws.
Torque: 36 in-lbs (4 Nm)
Maintenance
Wire
Harness
Remove Screws
85