Battery Installation - Victory 2009 VISION Rider's Manual

visionownersmanual.book Page 183 Wednesday, February 13, 2008 4:31 PM

Battery Installation

CAUTION
Connecting the negative cable first can produce an
electric shock that could result in damage or injury.
Always connect the positive cable first.
1. Slide the battery into the battery box. Be sure tabs
(1) at the bottom are engaged with slots (2) on
inner battery box.
NOTE:
Replace damaged or missing foam pads.
2. Install battery into box with terminals facing
forward. Tip the front battery box with battery
toward battery box and install bolt (3). Torque bolt
to specification.
3. Install positive battery cable first.Torque battery terminal bolt to specification.
4. Install red protective boot over positive (+) terminal. Install negative cable. Torque bolt
to specification.
5. Connect grill halves and install scoop (page 181).
MAINTENANCE
3
85 lb-in. (10 Nm)
36 lb-in. (4 Nm)
+ Terminal
- Terminal
Forward
2
1
183