Victory 2009 VISION Rider's Manual page 125

visionownersmanual.book Page 122 Wednesday, February 13, 2008 4:31 PM
OPERATION
Cruise Control Operation - Resume, Accelerate
RESUME
Pressing the Resume button (RES) will reset the cruise
to the memorized speed after braking or disengaging the
cruise control with either brake, throttle, or clutch.
NOTE:
Turning the cruise control master switch OFF will erase
the SET speed from memory and disengage the cruise
control.
ACCELERATE
Press (tap) and release the Accelerate (ACC) button to
increase speeds in approximately 1 mph increments.
Press and hold the ACC button to accelerate the vehicle
to a new SET speed until released, or until a maximum
increase of approximately 10 MPH is achieved
(whichever comes first).
NOTE:
If you use the throttle to accelerate and then release it, the cruise will resume the original
SET speed.
122
Resume
Accelerate
Decelerate