Victory 2009 VISION Rider's Manual page 124

visionownersmanual.book Page 121 Wednesday, February 13, 2008 4:31 PM
Cruise Control Operation - Setting
To set the cruise control (if equipped):
1. Turn the cruise control power switch ON.
2. Accelerate to the desired speed and press the
SET button. This speed will be logged in memory.
3. The CRUISE indicator lamp on the display will
illuminate.
Cruise control notes:
•
Cruise control can be set in any gear.
• The cruise control can be activated between
speeds of 25-95 mph (40-153 kph).
• Set speed will vary slightly in hilly terrain.
• The cruise control will not resume a pre-set speed if
the resulting accel / decel rate is too high or too
low. Example: If you are in 6th gear and try to
resume a set speed from 40mph, the cruise may
disengage.
•
Brake lights must be working properly.
OPERATION
Right Handlebar
On
Set
121