Battery Removal - Victory 2009 VISION Rider's Manual

visionownersmanual.book Page 181 Wednesday, February 13, 2008 4:31 PM

Battery Removal

CAUTION
Do not disconnect the positive cable before the
negative cable. Disconnecting the positive cable
first can produce an electric shock that could result
in damage or injury.
1. Turn handlebars fully right.
2. Remove five belly pan screws (1) with a 6mm
Allen wrench.
3. Remove screw (2) that joins the two side grills.
NOTE FOR INSTALLATION: The grill bolt is
placed in the FRONT hole; the center belly pan
screw uses the rear hole.
MAINTENANCE
2
1
1
85 lb-in. 36 lb-in.
(10 Nm) (4 Nm)
1
85 lb-in.
(10 Nm)
181