Victory 2009 VISION Rider's Manual page 298

visionownersmanual.book Page 295 Wednesday, February 13, 2008 4:31 PM
AUX Input Cable
iPod Input Cable
Input Cable Setup
The AUX and iPod input cables are
connected to the audio system through a
small hole in the left-side console storage
bin. Only one input cable can be
connected at any given time.
To change an input cable:
1. Open the left-side console storage bin.
2. Locate the input cable and sealing
grommet at the bottom of the bin.
3. Carefully pull the cable inside the bin.
AUX - iPod
295