08 Maintenance.fm Page 204 Monday, May 11, 2009 2:03 PM
Maintenance
Trunk Removal
6. Remove the compartment cover by squeezing
between the two notches.
7. Remove three of the four trunk mount bolts. Support
the trunk before removing the last bolt.
Tool: 13 mm socket, extension, drive handle
8. Install the street trim panel. See page 207.
Trunk Installation
1. Remove the street trim panel. See page 206.
2. Reverse the trunk removal instructions to reinstall
the trunk.
3. Tighten the trunk mounting bolts.
Torque: 26 ft-lbs (35 Nm)
4. Tighten the license plate bracket screws.
Torque: 36 in-lbs (4 Nm)
204