Victory 2009 VISION Rider's Manual page 157

8maintenance.fm Page 154 Wednesday, April 16, 2008 2:05 PM
MAINTENANCE
Rear Suspension Adjustment (Cont.)
Adjustment Procedure
1. Open left saddlebag door.
2. Remove cap from air fitting (1) in left bag.
3. Read recommended air pressure from decal for
total cargo and occupant weight. Use the
appropriate column (with trunk or no trunk).
4. Screw hose fitting of PV-48909 securely onto air
fitting and read air pressure on gauge.
5. To REDUCE air pressure, push the bleed button (2)
located on side of gauge. Bleed pressure in small
amounts until desired pressure is indicated on gauge. Remove the tool hose from air
fitting and install the cap.
6. To INCREASE pressure, install the gauge select the desired pressure from the chart
as described in steps 1-4 above. Pump the handle (3) until pressure increases to the
desired amount, then remove the hose and install the cap.
DO NOT exceed 72 PSI (496 kPa) in the shock.
154
2
1
3