Replacing Bulb For Licence Plate Light; Rear Light (Octavia) - Skoda Octavia Owner's Manual

Replacing bulb for licence plate light

Fig. 218 Remove the number plate light/replace the bulb

First read and observe the introductory information and safety warn-
ings on page 234.
›
Open the luggage compartment lid.
›
Insert a slotted screwdriver at the location indicated by the arrow
press it in lightly, and unlatch the springs.
›
Remove the lamp.
›
Pull the faulty bulb out of the holder in the direction of the arrow
›
Insert a new bulb into the holder.
›
Replace the lamp and lightly press it until the spring latches.

Rear light (Octavia)

Fig. 219 Remove cover/light
Fig. 220 Installing the lamp connector/lamp

First read and observe the introductory information and safety warn-
ings
Removing
›
Open the luggage compartment lid.
›
Insert the clamp for removing the wheel trims
hole at the position indicated by the arrow
» Fig. 218 - ,
›
Remove the cover in the direction of the arrow
›
Use the screwdriver from the tool kit
›
Grip the tail lamp assembly and carefully remove it by pulling vertically to the di-
» Fig. 218 - .
rection of travel with loosening movements.
›
Press together the interlocks on the connector in the direction of the arrow

» Fig. 220
1
›
Carefully remove the connector from the tail lamp assembly in the direction of
the arrow .
2
Install
›
Insert the connector into the lamp and lock it securely.
›
Insert the light vertically into the mounts on the bodywork
›
Carefully press the tail lamp assembly into the bodywork so that the bolts
» Fig. 221 on page 238 on the light latch with the mounts in the body
1
Be careful not to pinch the cable bundle between the bodywork and light.
›
Screw the tail lamp into place and install the cover.
›
Ensure that the cover engages firmly.
on page 234.
» page
» Fig. 219
» Fig. 219
» Fig. 219 -  to unscrew the lamp.
- .
215, Car tool kit into the
- .
- .
» Fig. 220 - .
» .

237
Fuses and light bulbs