Switching Off Temporarily - Skoda Octavia Owner's Manual

Hide thumbs Also See for Octavia:
Table of Contents

Advertisement

The Cruise Control System may automatically switch off when some brake as-
sist systems (e.g. ESC) intervene, when the speed exceeds maximum permissible
engine speed, or a similar event takes place.
The Cruise Control System also remains activated after shifting the gear!
Activating/deactivating
First read and observe the introductory information and safety warn-
ings
on page 139.
Activating
Turn the switch
» Fig. 135
into the ON position.
A
Deactivating
Turn the switch
» Fig. 135
into the OFF position.
A
Storing and maintaining speed
First read and observe the introductory information and safety warn-
ings
on page 139.
Activate the cruise control system
Drive at the desired speed.
Press the rocker button
in position SET
B
After you have released the rocker button
you have just stored is maintained at a constant speed without having to depress
the accelerator.
140
Driving
Fig. 135
Operating lever: Rocker switch
and switch of the cruise control
system
» page
140.
» Fig. 135
on page 140.
out of the position SET, the speed
B
Changing the stored speed
First read and observe the introductory information and safety warn-
ings
on page 139.
Increasing the speed with the rocker button
Press the rocker button
in position RES
B
The speed will increase continuously, if the rocker button is pressed and held in
the RES position. Release the rocker button once the desired speed is reached.
The set speed is then stored in the memory.
Decreasing the speed with the rocker button
The stored speed can be reduced by pressing the rocker button
page 140 into the position SET.
The speed will decrease continuously, if the rocker button is pressed and held in
the SET position. Release the rocker button once the desired speed is reached.
The set speed is then stored in the memory.
If the rocker button is released at a speed of less than 30 km/h, the speed is not
stored and the memory is erased. The speed must then be stored again by press-
ing the rocker button
in the position SET after increasing the speed of the ve-
B
hicle to more than 30 km/h.
Increasing the speed with the accelerator
Depress the accelerator pedal.
Releasing the accelerator pedal will cause the speed to drop again to the set
speed.
Decreasing the speed with the brake pedal
The speed can also be reduced by depressing the brake pedal, which temporarily
deactivates the system
» page

Switching off temporarily

First read and observe the introductory information and safety warn-
ings
on page 139.
The cruise control system is temporarily switched off by pressing the switch
» Fig. 135
on page 140 into the spring-tensioned position CANCEL or by de-
A
pressing the brake pedal.
The set speed remains stored in the memory.
B
» Fig. 135
on page 140.
B
B
140.
» Fig. 135
on

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents