Bar with warning lights
» page 12
5
Button for:
6
›
Set hours/minutes
» page 11
›
Displaying the distance and days until the next service inter-
val
» page 11
›
Resetting Service Interval Display
›
Reset trip counter for the distance driven
›
Charge level indicator
» page 11
Fuel gauge
» page 10
7
Revolutions counter
First read and observe the introductory information and safety warn-
ings
on page 8.
The red scale of the rev counter
1
the system begins to limit the engine speed. The system automatically restricts
the engine speed to a steady limit.
You should shift into the next higher gear before the red scale of the revolution
counter is reached, or select mode D on the automatic gearbox.
Follow the recommended gear to prevent engine speeds that are too high or too
low
» page
23.
For the sake of the environment
Correct shifting up has the following advantages.
It helps to reduce fuel consumption.
■
It reduces the operating noise.
■
It protects the environment.
■
It benefits the durability and reliability of the engine.
■
1)
This function only applies to certain countries.
» page 11
» page 11
» Fig. 2
on page 8 indicates the range in which
Display
Fig. 3 Display types
First read and observe the introductory information and safety warn-
ings
on page 8.
The instrument cluster can have one of the following types of display
Segment display without multi function display
Segment display with multi-function display
Monochromatic information display
Colour information display
Speedometer
First read and observe the introductory information and safety warn-
ings
on page 8.
Warning against excessive speeds
An audible warning signal will sound when the vehicle speed exceeds 120 km/h
The audible warning signal is switched off when the vehicle speed falls below
120 km/h.
» Fig.
3.
Instruments and warning lights
.
1)
9