›
Return the expanding rivet, screw in.
›
Firmly tighten the two attachment bolts with the screwdriver.
Changing the bulb for the licence plate light
Fig. 125 Changing the bulb for the licence plate light
ä
First read and observe the introductory information and safety warn-
ings
on page 141.
›
Insert a suitable thin object, e.g. a screwdriver into the recess in the region of
the arrow and carefully prise the number plate light out of the bumper
- .
›
Pull the number plate light out of the bumper a little.
›
Turn the bulb holder anti-clockwise and remove in the direction of the ar-
row
» Fig. 125
- .
›
Remove the faulty bulb from the socket.
›
Insert a new bulb into the socket.
›
Insert the bulb holder into the number plate light and turn clockwise as far as
the stop.
›
Insert the number plate light into the opening of the bumper at the left edge.
Lightly press it until the spring latches.
Tail lamp assembly
Ð
Fig. 126 Removing the tail lamp assembly
» Fig. 125
Fig. 127 Tail light assembly: Replacing bulbs
ä
First read and observe the introductory information and safety warn-
ings
on page 141.
Fold the seat rest of the rear set bench forward to make it easier to reach the
cover of the rear light more easily
Ð
wards.
Removing and installing the tail light
›
Open the luggage compartment door and unscrew the luggage compartment
cover
» page
43.
›
Prise the cover
1
of the locking mechanism
mechanism at the connector
›
Press the locking mechanism
» page
40, Folding the rear seat backrest for-
» Fig.
126, insert the screwdriver underneath the lower edge
» page
127, Vehicle tool kit and pull the locking
3
in the direction of arrow.
2
and remove the connector
4
Fuses and light bulbs
.
2
£
143