Changing Light Bulbs For Fog Lights; Changing The Bulb For The Licence Plate Light - Skoda Citigo Owner's Manual

Changing light bulbs for fog lights

Fig. 122 Front wheel houe: Changing light bulbs for fog lights
ä
First read and observe the introductory information and safety warn-
ings on page 141.
›
Unscrew the two attachment bolts on the wheel house trim with the screw-
driver » page 127, Vehicle tool kit (arrows)
›
Undo the expanding rivet » Fig. 122
A
flat, dull object, such as a coin, remove.
›
Fold the wheel house trim to the side, remove the connector
›
Turn the lamp holder (bulb set- holder including bulb) anti-clockwise as far as
the stop, remove.
›
Insert the lamp holder with the new bulb into the headlamp and turn it clock-
wise as far as the stop; insert the connector until it latches securely.
›
Fold the wheel house trim back.
›
Return the expanding rivet, screw in.
›
Firmly tighten the two attachment bolts with the screwdriver.
» Fig. 122.
below on the wheel house trim with a
.
1

Changing the bulb for the licence plate light

Fig. 123 Changing the bulb for the licence plate light
ä
First read and observe the introductory information and safety warn-
ings on page 141.
›
Insert a suitable thin object, e.g. a screwdriver into the recess in the region of
the arrow and carefully prise the number plate light out of the bumper
- .
›
Pull the number plate light out of the bumper a little.
›
Turn the bulb holder anti-clockwise and remove in the direction of the ar-
row » Fig. 123 - .
›
Remove the faulty bulb from the socket.
›
Insert a new bulb into the socket.
›
Insert the bulb holder into the number plate light and turn in a clockwise direc-
tion as far as the stop.
›
Insert the number plate light into the opening of the bumper at the left edge.
Lightly press it until the spring latches.

» Fig. 123

143
Fuses and light bulbs