Barcode - Oki MICROLINE ML380 Maintenance Manual

6.9

Barcode

1) Select barcode
(a) Code: ESC DLE A P1 N1 N2 N3 N4 N5 N6 N7 N8
(b) Compatibility: EPSON LQ/IBM
(c) Function:
Selects the type of barcodes and sets its size.
(d) Range:
• P1 designates subsequent data quantity. (MSB is invalid)
P1 = 0, 1, 3
P1 = 2, 4, 5, 6, 7, 8 This command is valid.
P1 ≥ 9 N1~N8 are valid, and N9~P1 are dumped.
• N1 and N2 select the barcode type. (Higher 4 bits are invalid)
If N1 and N2 are other than above, this command is ignored and the data designated
by P1 is dumped.
• N3 and N4 set vertical length of barcode. The unit is 15/180 inch. (Higher 4 bits
are invalid.)
Barcode vertical length : (N3 × 10 + N4) × (15/180)"
N3 = N4 = 0
N3 ¥ 10 + N4 ≥ 25
• N5 sets the width of black bar.
The minimum black bar width is 1/360 inch.
N5 = 0 : Setting does not change.
N5 ≥ 8 : N5 = 7 is set.
• N6 sets space width.
The minimum space width is 1/360 inch.
N6 = 0 : Setting does not change.
N6 ≥ 8 : N6 = 7 is set.
40959201TX Rev.1
This command is invalid.
N1 N2 Barcode type
0 1 EAN8
0 2 EAN13
1 0 UPC-A
1 4 UPC-E
2 0 CODE39
3 0 Interleave 2 of 5
4 0 CODE128
: Setting does not change.
: 24 is set.
115 /