Oki MICROLINE ML380 Maintenance Manual page 339

MSB
1
LSB
MSB
2
LSB
MSB
3
LSB
d0
d0 + d1 + d2 = cell matrix width
• At loading time if printer is in Super/Sub mode then only two bytes of data are
required for each column.
3) Load DLL character
(a) Code: ESC = n1 n2 # a1 a2 a3 m ad1 ad2 id1 id2 d1 d2 d3 d4 d5 [data]
(b) Compatibility: IBM
(c) Function:
This command sequence is ignored.
4) DLL font select
(a) Code: ESC % n
(b) Compatibility: EPSON LQ
(c) Function:
Selects the character set to be used.
(d) Range:
• When n = 01H, 31H, 81H, B1H DLL character set selected.
(e) Out of range:
• When n does not equal to the values above, this command will be ignored.
(f) Additional details:
• DLL character areas are 00H — 7FH
• If LQ DLL is loaded, LQ DLL will be selected. If Utility DLL is loaded, Utility DLL
will be selected.
40959201TX Rev.1
3 5 10
4 6 11
6 9 12
d1
n = 00H, 30H, 80H, B0H DLL character set cancel.
3m-2
b0~b7 valid as DLL Data
3m-1
b0~b7 valid as DLL Data
3m
b0~b7 valid as DLL Data
d2
74 /