Command Description; Horizontal Control - Oki MICROLINE ML380 Maintenance Manual

6.

COMMAND DESCRIPTION

6.1

Horizontal Control

1) Carriage return
(a) Code: CR
(b) Compatibility: EPSON LQ/IBM
(c) Function:
Terminates the print line and returns the print position to the start of the line.
The data in the print buffer will be printed.
(d) Additional details:
• CR will perform a line feed if auto LF is on. Auto LF can be set by Menu or control
codes.
• Double width mode which is designated by SO (and ESC SO in Epson mode) will
be reset.
Auto feed XT signal low Epson
2) Horizontal tab set
(a) Code: ESC D n1 n2 ... nj nk NUL
(b) Compatibility: EPSON LQ/IBM
(c) Function:
The tab stops will be set according to the values of n which specify the character
positions, starting from the Epson—Left Margin and IBM—home position.
(d) Range:
• Range k = 1—32 Epson
• Range n = 1—255
• nj < nk
nj ≥ nk
(e) Out of range:
• If k = 0 or k > 32 — Epson
The last value and any following value of n will be ignored.
• Maximum n value in each CPI, values larger maximum are ignored.
40959201TX Rev.1
1—28 IBM
CPI ML381 Turbo
10 135
12 163
15 203
17.1 233
20 255
valid.
nk invalid — IBM.
nk ignored sequence terminated — Epson.
k > 28 — IBM
ML380 Turbo
79
95
119
137
159
49 /