Oki MICROLINE ML380 Maintenance Manual page 334

(d) Range:
• Range n = 0—255 Number of 1/360" increments.
(e) Additional details:
• Power on default or l-Prime signal resets the value by this command and sets the
value which is determined by Menu.
• This command is valid in any portion of lines.
• No line feed occurs when n = 0.
• Top of form will not be set.
(f) Related functions:
• This command is identical to the ESC.[.n command.
• LF, VT, or CR (and condition of Auto LF is on) proceeds predetermined LF.
29) Set Page Length in defined unit
(a) Code: ESC ( C Ln Hn Lp Hp
(b) Compatibility: EPSON LQ
(c) Function:
Set page length for the currently selected paper mode.
Paper modes are Top, Rear, Bottom and CSF.
(d) Range:
Ln : 0 ~ 255
Hn : 0 ~ 255
Lp : 0 ~ 255
Hp : 0 ~ 255
Page Length = (Lp + Hp × 256) × defined unit
0 < Page Length ≤ 22 inch.
(e) Additional Details
• Default basic unit is 1/360 inch.
• When the page length set by the command equals 0 inch or exceeds 22 inch, the
command becomes invalid. Page length defined previously is effective.
30) Set Page format
(a) Code: ESC ( c Ln Hn Lt Ht Lb Hb
(b) Compatibility: EPSON LQ
(c) Function:
Sets the Top and Bottom Margins in the defined unit.
(d) Range:
Ln : 0 ~ 255
Hn : 0 ~ 255
Lt : 0 ~ 255
Ht : 0 ~ 255
Lb : 0 ~ 255
Hb : 0 ~ 255
Top margin
Bottom margin = (Lb + Hb × 256) × defined unit
40959201TX Rev.1
= (Lt + Ht × 256) × defined unit
69 /