Oki MICROLINE ML380 Maintenance Manual page 327

10) Set\Reset automatic linefeed
(a) Code:
(b) Compatibility: IBM
(c) Function:
Enables/disables automatic line feed. The printer performs an automatic LF each
time it receives a carriage return (CR).
(d) Range:
• If n = ODD
n = EVEN
(e) Out of range:
• The line feed is executed for the current line spacing setting.
11) Fine line feed (n/180 inch)
(a) Code: ESC J n
(b) Compatibility: EPSON LQ/IBM PPR/IBM AGM
(c) Function:
Immediate line feed is executed without changing the current line spacing.
(d) Range:
• Range n = 0—255 Number of 1/180" increments — Epson
(e) Additional details:
• The contents of the buffer are printed without a Carriage Return. (The printhead
does not move to the left margin.) In IBM mode if auto CR is selected in Menu
a carriage return will be performed.
• This command does not need a cancel code, since it is executed only once.
• No feed is performed when n = 0. (Ignored in IBM mode)
(f) Related functions:
• Double width set by SO (or ESC SO in Epson mode) will not be reset.
• ESC [ \ sets the spacing increment for IBM mode.
12) Fine line feed (n/360 inch)
(a) Code: ESC ] n
(b) Compatibility: EPSON LQ
(c) Function:
A n/360" immediate line feed is executed without changing the current line spacing.
(d) Range:
• Range n = 0—255 Number of 1/360" increments.
40959201TX Rev.1
ESC 5 n
SET automatic LF.
RESET automatic LF.
n/180" Epson LQ
n/180" IBM AGM
n/216" IBM PPR
= 1—255 Number of 1/180" (1/216") increments — IBM
62 /