Print At A Specified Time - Timed Job; Direct Printing Of Pdf Files; Printing Via Electronic Mail - E-Mail Printing; Barcode Printing - Oki B730dn User Manual

P S
RINT AT A PECIFIED
The delayed print feature allows you to store the data in the printer beforehand and then
print it out automatically at the specified time.
D P
IRECT RINTING OF
You can send a PDF file directly to the printer for printing without using the printer driver.
As the print data is sent directly to the printer, the printing process is simpler than printing
with the printer driver and it is done at a faster speed.
NOTE
You may not be able to print some PDF files directly by the printer due to the
way they were created. When this happens, open the PDF files and use the
printer driver to print them.
P E
RINTING VIA LECTRONIC
When the optional hard disk or compact flash has been installed and the printer is
connected to a network, enabling it to receive e-mails via TCP/IP communication, e-mails
can be sent from the computer to this printer.
Printing of e-mail contents and TIFF or PDF attachments can be done from this printer.
This feature may need to be enabled via the webpage under Networking/Receive Settings.
B P
ARCODE RINTING
This printer uses standard PCL font selection commands to enable printing of algorithm
generated bar codes.
Benefits:
> Any size barcode generation
> Automatically generates checksums
> Automatically adds stop and start characters
Intelligent barcoding
Unlike some barcode solutions, which merely add fonts to a PC or printer, this printer
actually extends the PCL5 language. Barcode formatting, error detection and checksum
calculation are performed by the printer, reducing the load on the host and the network.
Barcodes can be printed in almost any size or rotation, bar width and height. Caption text
can be embedded in the bars or printed above or below the bars in a variety of fonts and
sizes.
See the Reference Guide for detailed use information on all the above printing features.
P
RINTING FILES FROM A
The Host USB connector on the control panel can be used to connect a USB Flash Drive.
You can print directly from the USB FLash drive. The files stored in the Flash Drive must be
of the following formats:
> Supported PDF (upto v1.6)
> PCL5, PCL6, FX80 or PostScript
> Generic Text (e.g. .txt file)
T - T J
IME IMED OB
PDF F
ILES
M - E- P
AIL MAIL
USB
FLASH DRIVE
Printing > 25
RINTING